Secured Card Reader NFC Ready 13.56MHZ for IP Force

Se importa de EE. UU. bajo pedido. El precio ya incluye la importación y el IVA; la entrega en México se cotiza con tu pedido.

Características (del fabricante, en inglés)

• 13.56MHz
• ISO14443A, ISO14443B, NFC Support reads PACs ID
• Allows the use of Mifare, HID iClass, DESFire and other standards, including NFC support – application for Android 2N® Mobile Key.

Medidas y especificaciones (en inglés)

• RFID Reader
• Wiegand Interface: Input/Output mode, located on RFID card reader module
• Active Switch Output: 9 up to 13 V DC depending on power supply (PoE: 9 V; adaptor: power supply voltage minus 1 V), max 600 mA
• Passive Switch: NO/ NC contacts, up to 30 V / 1 A AC/DC
• Supported Cards
• ISO/IEC 14443A: Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
• ISO/IEC 14443B: CEPAS, HID iCLASS
• JIS X 6319: Felica
• Smartphone with Android 6.0 and higher
• Mechanical Properties
• Operating Temperature: −40 °C to 55 °C
• Storage Temperature: −40 °C to 70 °C
• Operating Relative Humidity: 10% – 95%RH (non-condensing)

Descripción del fabricante (en inglés)

An internal reader for RFID cards for installation in 2N® IP Force. It allows the use of Mifare, HID iClass, DESFire and other standards, including NFC support – application for Android 2N® Mobile Key. The reader reads the secure PACS ID number from HID iClass cards or the UID serial number from other cards. It includes two switches, two logical inputs and the Wiegand interface. The reader is compatible with IP Force with two buttons and with pictograms. It also comes with a tamper switch for indicating open front panel.