Synthesis Triple 8-IN 2 1/2-WAY D2 in-Wall Speaker

Se importa de EE. UU. bajo pedido. El precio ya incluye la importación y el IVA; la entrega en México se cotiza con tu pedido.

Características (del fabricante, en inglés)

• Computer-optimized HDI Constant Directivity Horn with very smooth and predictable off-axis behavior over a wide coverage area
• D2415K, 1.5 in/38mm annular ring Teonex diaphragm compression driver with advanced HDI geometry horn
• Powerful cast-frame, Advanced Aluminum Matrix cone woofers with low-distortion neodymium motor structures
• Sonoglass baffle with integrated HDI waveguide for maximum strength and high internal damping
• Solid MDF enclosure installs behind drywall and provides optimized acoustic performance and enhanced acoustic isolation from the wall
• Rubber isolation mounts attach cabinet to wall studs, ensuring a firm yet isolated mounting
• Bi-Wire and Bi-Amp capable network using gold-plated binding posts on rear enclosure, and an easy Molex baffle to network connection
• Zero-bezel, magnetically-attached grille can be painted to match décor

Medidas y especificaciones (en inglés)

• Speaker type: 2½-way in-wall loudspeaker
• Low frequency transducer: Three 8 in (200 mm) cast-frame, Advanced Aluminum Matrix cone woofers
• Mid/High frequency transducer: D2415K, 1.5 in (38 mm), dual annular ring Teonex diaphragm compression driver mounted to Sonoglass horn/baffle
• Maximum recommended power: 445 Watts RMS (CEA-426B specification, calculated onto the SCL-2 rated load impedance)
• Frequency response (-6dB on-axis): 57Hz–25kHz
• Coverage area (-6dB@20kHz): 80 x 70 Degrees (Hor x Vert)
• Coverage area (-6dB@10kHz): 100 x 100 Degrees (Hor x Vert)
• Sensitivity (2.83V@1m): 92dB
• Nominal Impedance: 6 Ohm
• Crossover frequencies: 225Hz, 1.3kHz
• Enclosure type: Sealed in-wall mount with included back box
• Inputs: Dual gold-plated binding posts
• Finished grille dimensions (H x W): 40.2 x 12.8 in (1020.8 x 325.5 mm)
• Cutout dimensions with backbox (H x W): 38.25 x 11.5 in (971.6 x 292.1 mm)

Descripción del fabricante (en inglés)

Part of the JBL Synthesis Custom Loudspeakers range, the SCL-2 offers the highest level of acoustic performance available from a flush-mount loudspeaker. The SCL-2 is designed with a 2.5-way, triple 8 in (200 mm) driver configuration for low-frequency extension with high output capability and powerful dynamics. A D2415K dual voice coil, dual 1.5 in (38 mm) annular ring diaphragm Teonex compression driver with advanced HDI geometry horn works in conjunction with three powerful cast-frame, 8 in (200 mm) Advanced Aluminum Matrix cone woofers with low distortion motor structures.