Access Unit 2.0 Touch Keypad & Rfid 125KHZ, Secured 13.56MHZ, NFC

Se importa de EE. UU. bajo pedido. El precio ya incluye la importación y el IVA; la entrega en México se cotiza con tu pedido.

Características (del fabricante, en inglés)

• Capacative touch technology
• Regular Automatic calibration (SmartSense Auto-tuning)
• Configurable backlight intensity indication within multicolored LEDs
• Acoustic response

Medidas y especificaciones (en inglés)

• Interfaces
• Power Supply: PoE and/or 12V/1A DC and PoE 802.3af (Class 0–12.95W)
• LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
• Recommended cabling: Cat-5e or better
• Active switch output: 8 to 12V DC/max 600mA
• Passive switch: NO/NC contacts, up to 30V/1A AC/DC
• Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
• OFF = open or Uin> 1.5V
• ON = short-circuit or Uin< 1.5V
• Tamper switch: Native part of the 2N Access Unit 2.0
• Audio: Buzzer (97dBA)
• Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
• Touch Keypad
• Technology: capacitive touch technology

Descripción del fabricante (en inglés)

Let the residents decide whether to remember a PIN code or carry an RFID card with them. The system can even be set to require both for access at night. Identification using a PIN code is also useful for one-off access. Does the heating in the building need to be inspected? The user can send the technician a one-off code for access to the utility room and leave it up to them when they come to do the job. For use with double height Savant Door Stations.